Description
The generic function hist
computes a histogram of the given data values. If plot = TRUE
, the resulting object of class "histogram"
is plotted by plot.histogram
, before it is returned.
Usage
hist(x, …)# S3 method for defaulthist(x, breaks = "Sturges", freq = NULL, probability = !freq, include.lowest = TRUE, right = TRUE, density = NULL, angle = 45, col = NULL, border = NULL, main = paste("Histogram of" , xname), xlim = range(breaks), ylim = NULL, xlab = xname, ylab, axes = TRUE, plot = TRUE, labels = FALSE, nclass = NULL, warn.unused = TRUE, …)
Arguments
x
a vector of values for which the histogram is desired.
breaks
one of: a vector giving the breakpoints between histogram cells, a function to compute the vector of breakpoints, a single number giving the number of cells for the histogram, a character string naming an algorithm to compute the number of cells (see ‘Details’), a function to compute the number of cells. In the last three cases the number is a suggestion only; as the breakpoints will be set to pretty
values, the number is limited to 1e6
(with a warning if it was larger). If breaks
is a function, the x
vector is supplied to it as the only argument (and the number of breaks is only limited by the amount of available memory).
freq
logical; if TRUE
, the histogram graphic is a representation of frequencies, the counts
component of the result; if FALSE
, probability densities, component density
, are plotted (so that the histogram has a total area of one). Defaults to TRUE
if and only if breaks
are equidistant (and probability
is not specified).
probability
an alias for !freq
, for S compatibility.
include.lowest
logical; if TRUE
, an x[i]
equal to the breaks
value will be included in the first (or last, for right = FALSE
) bar. This will be ignored (with a warning) unless breaks
is a vector.
right
logical; if TRUE
, the histogram cells are right-closed (left open) intervals.
density
the density of shading lines, in lines per inch. The default value of NULL
means that no shading lines are drawn. Non-positive values of density
also inhibit the drawing of shading lines.
angle
the slope of shading lines, given as an angle in degrees (counter-clockwise).
col
a colour to be used to fill the bars. The default of NULL
yields unfilled bars.
border
the color of the border around the bars. The default is to use the standard foreground color.
main, xlab, ylab
main title and axis labels: these arguments to title()
get “smart” defaults here, e.g., the default ylab
is "Frequency"
iff freq
is true.
xlim, ylim
the range of x and y values with sensible defaults. Note that xlim
is not used to define the histogram (breaks), but only for plotting (when plot = TRUE
).
axes
logical. If TRUE
(default), axes are draw if the plot is drawn.
plot
logical. If TRUE
(default), a histogram is plotted, otherwise a list of breaks and counts is returned. In the latter case, a warning is used if (typically graphical) arguments are specified that only apply to the plot = TRUE
case.
labels
logical or character string. Additionally draw labels on top of bars, if not FALSE
; see plot.histogram
.
nclass
numeric (integer). For S(-PLUS) compatibility only, nclass
is equivalent to breaks
for a scalar or character argument.
warn.unused
logical. If plot = FALSE
and warn.unused = TRUE
, a warning will be issued when graphical parameters are passed to hist.default()
.
…
further arguments and graphical parameters passed to plot.histogram
and thence to title
and axis
(if plot = TRUE
).
Value
an object of class "histogram"
which is a list with components:
the \(n+1\) cell boundaries (= breaks
if that was a vector). These are the nominal breaks, not with the boundary fuzz.
\(n\) integers; for each cell, the number of x[]
inside.
values \(\hat f(x_i)\), as estimated density values. If all(diff(breaks) == 1)
, they are the relative frequencies counts/n
and in general satisfy \(\sum_i \hat f(x_i) (b_{i+1}-b_i) = 1\), where \(b_i\) = breaks[i]
.
the \(n\) cell midpoints.
a character string with the actual x
argument name.
logical, indicating if the distances between breaks
are all the same.
Details
The definition of histogram differs by source (with country-specific biases). R's default with equi-spaced breaks (also the default) is to plot the counts in the cells defined by breaks
. Thus the height of a rectangle is proportional to the number of points falling into the cell, as is the area provided the breaks are equally-spaced.
The default with non-equi-spaced breaks is to give a plot of area one, in which the area of the rectangles is the fraction of the data points falling in the cells.
If right = TRUE
(default), the histogram cells are intervals of the form (a, b]
, i.e., they include their right-hand endpoint, but not their left one, with the exception of the first cell when include.lowest
is TRUE
.
For right = FALSE
, the intervals are of the form [a, b)
, and include.lowest
means ‘include highest’.
A numerical tolerance of \(10^{-7}\) times the median bin size (for more than four bins, otherwise the median is substituted) is applied when counting entries on the edges of bins. This is not included in the reported breaks
nor in the calculation of density
.
The default for breaks
is "Sturges"
: see nclass.Sturges
. Other names for which algorithms are supplied are "Scott"
and "FD"
/ "Freedman-Diaconis"
(with corresponding functions nclass.scott
and nclass.FD
). Case is ignored and partial matching is used. Alternatively, a function can be supplied which will compute the intended number of breaks or the actual breakpoints as a function of x
.
References
Becker, R. A., Chambers, J. M. and Wilks, A. R. (1988) The New S Language. Wadsworth & Brooks/Cole.
Venables, W. N. and Ripley. B. D. (2002) Modern Applied Statistics with S. Springer.
See Also
nclass.Sturges
, stem
, density
, truehist
in package MASS.
Typical plots with vertical bars are not histograms. Consider barplot
or plot(*, type = "h")
for such bar plots.
Examples
# NOT RUN {op <- par(mfrow = c(2, 2))hist(islands)utils::str(hist(islands, col = "gray", labels = TRUE))hist(sqrt(islands), breaks = 12, col = "lightblue", border = "pink")##-- For non-equidistant breaks, counts should NOT be graphed unscaled:r <- hist(sqrt(islands), breaks = c(4*0:5, 10*3:5, 70, 100, 140), col = "blue1")text(r$mids, r$density, r$counts, adj = c(.5, -.5), col = "blue3")sapply(r[2:3], sum)sum(r$density * diff(r$breaks)) # == 1lines(r, lty = 3, border = "purple") # -> lines.histogram(*)par(op)require(utils) # for strstr(hist(islands, breaks = 12, plot = FALSE)) #-> 10 (~= 12) breaksstr(hist(islands, breaks = c(12,20,36,80,200,1000,17000), plot = FALSE))hist(islands, breaks = c(12,20,36,80,200,1000,17000), freq = TRUE, main = "WRONG histogram") # and warning# }# NOT RUN {<!-- % save 2 seconds -->## Extreme outliers; the "FD" rule would take very large number of 'breaks':XXL <- c(1:9, c(-1,1)*1e300)hh <- hist(XXL, "FD") # did not work in R <= 3.4.1; now gives warning## pretty() determines how many counts are used (platform dependently!):length(hh$breaks) ## typically 1 million -- though 1e6 was "a suggestion only"# }# NOT RUN {require(stats)set.seed(14)x <- rchisq(100, df = 4)# }# NOT RUN {## Comparing data with a model distribution should be done with qqplot()!qqplot(x, qchisq(ppoints(x), df = 4)); abline(0, 1, col = 2, lty = 2)## if you really insist on using hist() ... :hist(x, freq = FALSE, ylim = c(0, 0.2))curve(dchisq(x, df = 4), col = 2, lty = 2, lwd = 2, add = TRUE)# }
Run the code above in your browser using DataLab